Roy, Utah / Service & panel upgrades
Reliable Electrical Panel Upgrades in Roy, UT
Ensure your home or business in Roy has the safe, sufficient power it needs with a professional panel upgrade.
The problem
What an overloaded or outdated panel looks like
Is your home or business in Roy experiencing frequent tripped breakers, flickering lights, or an inability to run multiple appliances simultaneously? These are common signs that your electrical panel may be outdated or overloaded, posing a risk to your property and daily operations.
An electrical panel is the single point where every circuit in the building meets the utility service. When that panel is undersized, worn, or built with hardware that no longer meets code, the failure mode isn't just inconvenience — overheating wires and connections at the panel are a documented fire hazard.
Common causes
- Outdated electrical panels (e.g., fuse boxes or older 60-amp panels)
- Increased demand from new appliances or technology
- Frequent circuit breaker trips or blown fuses
- Flickering or dimming lights throughout the property
Capacity reference
Service size vs. what it actually supports
Most Roy panel upgrades come down to one question: does the existing service have enough amperage headroom for how the building is used today? Upgrading from a 100-amp to a 200-amp service is the most common panel upgrade we perform in Utah homes with increased power needs.
| Service size | Typically found in | Practical limitation | Upgrade priority |
|---|---|---|---|
| 60 A | Utah homes built before the 1970s; often paired with a fuse box | Insufficient for modern electrical demands — little to no headroom for added appliances | High |
| 100 A | Mid-century through late-century homes | Workable for a modest load, but tight once high-power appliances are added | Moderate |
| 200 A | Current standard for a full-size home upgrade | Handles modern power demands with room for future circuits | Target |
| FPE / Zinsco | Any age — identified by panel brand, not amperage | Known fire risk regardless of rated capacity | Immediate |
Why this is not a DIY job
Panel work is live-service work
Electrical panel upgrades are complex and dangerous jobs that require specialized knowledge of electrical systems and local building codes. Attempting a DIY upgrade can lead to severe electrical shock, fire hazards, and costly code violations, making professional expertise essential for safety and compliance.
A panel upgrade also has to survive an inspection. Work that isn't permitted and inspected can resurface later as a code violation during a sale — the same reason a properly executed upgrade helps resale value: the home meets current electrical safety standards and can handle modern power demands.
What a service visit includes
Our certified electricians will conduct a thorough assessment of your current electrical system, provide a detailed explanation of the necessary upgrades, expertly install your new, higher-capacity electrical panel, and ensure all work passes local Roy electrical inspections.
Scope of work
How a panel upgrade runs
- Assessment & load reviewWe inspect the existing panel, service entrance, and circuit inventory, then size the new service to how the building is actually used.
- PermitPermits are required for electrical panel upgrades in Roy to ensure the work meets local building codes and safety standards. We pull it before work begins.
- Power disconnectedService is shut down and secured before any panel hardware is touched.
- Old panel removedThe existing panel or fuse box comes out, along with any hardware that can't be reused.
- New panel & breakers installedThe new, higher-capacity panel is mounted and populated with breakers; circuits are landed and labeled.
- Wiring connectedNew wiring and service entrance connections are made to code.
- InspectionThe finished installation is inspected before the job is closed out.
Cost & permits
What a Roy panel upgrade costs
For homeowners and business owners in Roy, a typical electrical panel upgrade can range from $1,500 to $4,000, with more extensive service entrance upgrades potentially reaching $6,000 or more.
- Standard panel upgrade
- $1,500–$4,000
- Complex job / service entrance
- $6,000+
- Electrical permit, Roy
- typically a few hundred $
- Estimate
- Free
The cost of an electrical permit in Roy can vary depending on the scope of the project. Final pricing depends on the existing service, panel location, and whether the service entrance is being replaced — we confirm all of it in writing before work starts.
Questions we get in Roy
Panel upgrade FAQ
Do I need a permit for a panel upgrade in Roy?
Yes. Permits are required for electrical panel upgrades in Roy, Utah, so the work can be verified against local building codes and safety standards. The permit cost varies with the scope of the project but is typically a few hundred dollars.
How do I know if my panel needs replacing?
The usual indicators are frequently tripping breakers, flickering lights, an outdated fuse box, or the addition of new high-power appliances that the existing service wasn't sized for. Any of those is reason enough to have the panel assessed.
My panel says Federal Pacific or Zinsco. Is that a problem?
Yes. Federal Pacific Electric (FPE) Stab-Lok panels and Zinsco panels are known hazardous brands that often require immediate replacement due to fire risk. Amperage rating doesn't change that — the hazard is in the hardware itself.
Is 60 amps enough for my house?
Generally no. Many homes built before the 1970s in Utah still have 60-amp electrical panels, which are insufficient for modern electrical demands. A 100-amp to 200-amp upgrade is the common path for homes with increased power needs.
Does a panel upgrade affect resale value?
It helps. A panel upgrade can increase the resale value of a home by ensuring it meets current electrical safety standards and can handle modern power demands — and it removes a finding that buyers' inspectors routinely flag.
Why not just replace the breakers?
Breakers only protect the circuits behind them. If the panel itself is undersized, an obsolete fuse box, or a known hazardous brand, new breakers don't address overheating wires and circuits — the panel and, where needed, the service entrance have to be replaced.
Next step
Get a Free Estimate Today – Schedule Your Roy Panel Upgrade Consultation!
Tell us what your panel is doing — the tripping, the flickering, the brand on the door — and we'll assess the service, size the upgrade, pull the permit, and see it through inspection.