Santaquin, Utah · EV Charger Panel Upgrades
Upgrade your panel for an EV charger in Santaquin
Here is what this costs and what it returns. Before you can safely run a Level 2 charger, your electrical panel has to have room for it. This page lays out the real numbers, the warning signs to watch for, and exactly what a licensed electrician handles — no fluff.
The cost, and the two paths it can take
Every EV charger install in Santaquin lands on one of two paths. If your existing panel has spare capacity, it's a straightforward job. If your panel is full or undersized, you upgrade it first — and the total shifts accordingly. Here's the honest range for each.
For a home with an existing 200-amp panel and room to spare, a Level 2 charger install typically runs in this range — dedicated 240-volt circuit, breaker, and labor.
When the panel has to be upgraded first, the total install cost in Utah generally falls in this range — covering both the new panel and the charger circuit.
What a 100-to-200-amp upgrade actually pays for
If your home needs the upgrade, this is where the money goes. A standard 100-to-200-amp panel upgrade in Utah typically costs between $1,500 and $3,000, and that figure is not just a bigger box — it's the whole package.
Ranges reflect typical Utah pricing for the work described above. Your final number depends on your panel's condition, meter location, and the specific charger being installed. We confirm everything with an on-site assessment before any work begins.
Signs your panel needs the upgrade first
Many Santaquin-area homes — especially those over 25 years old — were built with 100-amp panels that are often already at capacity and were never designed for the added load of a Level 2 charger. Watch for these:
- Frequent breaker tripsCircuits giving out under everyday load is a clear sign the panel is stretched thin.
- Lights flicker when appliances startA dip when the AC or dryer kicks on points to a panel near its limit.
- No open breaker spaceA Level 2 charger needs a dedicated 240-volt circuit. If there's nowhere to add it, the panel comes first.
- A 100-amp panel that's 25+ years oldCommon in older Santaquin homes and rarely sized for modern EV loads.
How the job runs, start to finish
Straightforward work, done to code. Here's the order it happens in.
On-site panel assessment
We check your panel's amperage, available breaker space, and current load to determine whether you're on the simple path or need an upgrade first.
Permit & code compliance
Installing a Level 2 charger in Utah requires a permit from your local building authority. We pull it — permits for panel upgrades generally run $50–$300 — so the work is inspected and code-compliant.
Panel upgrade, if needed
If your panel is at capacity, a licensed electrician installs a new 200-amp panel and breakers before the charger circuit goes in.
Dedicated 240-volt circuit & charger
We run the dedicated 240-volt circuit your Level 2 charger requires and complete the install to the 2026 NEC standards adopted in Utah.
Why the licensed-electrician requirement matters
Under the 2026 National Electrical Code adopted in Utah, permanently installed EV chargers must be installed by a qualified, licensed electrician. That's not red tape — it's what keeps a high-amperage 240-volt circuit safe inside your home, and it's what makes the permit and inspection valid. When you budget for a panel upgrade, licensed labor is part of what the $1,500–$3,000 range already covers.
Request an estimate
Straight answers to common questions
Do I always need a panel upgrade for an EV charger?
No. If your home already has a 200-amp panel with sufficient spare capacity, a Level 2 install typically runs $800–$1,800 with no upgrade needed. The upgrade only comes into play when your existing panel is full or undersized for the added load.
How much does the panel upgrade itself cost?
A standard 100-to-200-amp electrical panel upgrade in Utah typically costs between $1,500 and $3,000, covering the new panel, breakers, permit, and labor. With the charger install added, the total generally lands between $2,400 and $4,200.
Is a permit really required?
Yes. Installing a Level 2 EV charger in Utah requires a permit from local building authorities to ensure safety and code compliance. Permits for panel upgrades generally cost between $50 and $300, and your electrician typically handles the permitting as part of the job.
Can I install the charger myself to save money?
Not for a permanently installed charger. The 2026 NEC adopted in Utah mandates that permanently installed EV chargers be installed by a qualified, licensed electrician. This protects your home, keeps the install code-compliant, and keeps the permit and inspection valid.
Get a clear estimate before anything is decided
Tell us about your panel and your charger, and we'll assess on site whether you're on the $800–$1,800 path or need the upgrade first. No surprises — you'll know the number before we start.
Request a Santaquin estimate